| SR.NO. | DESCRIPTION | UNIT | S ZNC 20- 3520 |
| 1 | Work Tank Dimensions | Mm | 600 x 370 x 250 |
| 2 | Table Size | Mm | 350 X 200 |
| 3 | X – Axis Travel With Ball Screw. | mm | 200 |
| 4 | Y – Axis Travel With Ball Screw. | mm | 120 |
| 5 | Z – Axis Travel With Ball Screw. | mm | 150 |
| 6 | Table assembly construction | With LM Guides | |
| 7 | Maximum Job Height | mm | 140 |
| 8 | Maximum Job Weight | Kgs. | 100 |
| 9 | Day Light | mm | 410 |
| 10 | No. Of Filters | No. | 1 |
| 11 | Dielectric tank capacity | ltrs | 200 |
SPECIFICATIONS OF CONTROLLERS
| SR. NO | CONTROLLER TYPE | UNIT | EMBEDDED EDM LOGIC ZNC CONTROLLER |
| 1 | Nominal Current | Amp. | 20 |
| 2 | Best MRR (Cu to Steel) | Mm³ | 180 |
| 3 | Best Surface Finish | Ra | 0.5 |
| 4 | Minimum Electrode Wear | % | 0.1 |
| 5 | Maximum Electrode Weight | Kgs. | 80 |
| 6 | Connected Load | KVA | 3 |
| 7 | Z Axis Motor | TYPE | Easy servo motor |
| 8 | Z Axis programming steps | No | 10 |
| 9 | No of ON time settings | No | 99 |
| 10 | No of OFF time settings | No | 99 |
| 11 | Program Memory | Nos | 99 |