SPECIFICATIONS OF CONTROLLER –CNC – 20
| 1 | CONTROLLER TYPE | EMBEDDED EDM LOGIC CNC CONTROLLER | |
| 2 | Nominal Current | Amp. | 20 |
| 3 | Best MRR (Cu to Steel) | mm³ | 140 |
| 4 | Best Surface Finish | Ra | 0.5 |
| 5 | Minimum Electrode Wear | % | 0.1 |
| 6 | Maximum Electrode Weight | Kgs. | 50 |
| 7 | Connected Load | KVA | 3 |
| 8 | X-Y-Z and A Axis Motors | TYPE | Easy servo |
SPECIFICATIONS OF MACHINE TOOL – NCM
| SR.NO. | DESCRIPTION | UNIT | |
| 1 | X – Axis Travel With linier shaft . | mm | 2400 |
| 2 | Y – Axis Travel With Ball Screw. | mm | 400 |
| 3 | Z – Axis Travel With Ball Screw. | mm | 700 |
| 4 | Table assembly construction | With LM Guides | |
| 5 | No. Of Filters | No. | 1 |
| 6 | Dielectric tank capacity | ltrs | 100 |
JOB SPECIFICATIONS
| SR.NO. | DESCRIPTION | UNIT | |
| 1 | Minimum Pipe ID | mm | 150 |
| 2 | Maximum Pipe ID | mm | 1200 |
| 3 | Notch Orientation | Longitudinal & Transverse | |
| 4 | Notch Location Pipe | ID & OD | |
| 5 | Flat bottom hole | Yes | |
| 6 | Side drill hole | Yes | |
| 7 | Position of Notch From end | mm | 2.5 M Maximum |